Wire Sawing Services in Abu Dhabi

Some concrete is too thick for a conventional saw. That is when diamond wire sawing becomes the right solution.

Welldonestar provides concrete wire sawing services across Abu Dhabi for thick, reinforced and difficult-to-access concrete structures. We cut foundations, pile caps, bridges, columns, beams, machine bases and other large concrete sections with controlled cutting and very low vibration.

Cutting since 2013

in the UAE

Own Machines

And Crews

Scanning Before

Structural Cut

Night & Shutdown

Work Available

Trusted By Leading Companies

DIAMOND WIRE SAWING

Diamond Wire Sawing for Thick and Reinforced Concrete

A circular blade has a finite cutting depth. As concrete gets thicker, the blade may not be able to cut completely through the section from one side. Diamond wire sawing works differently. A continuous loop of diamond-impregnated wire is routed around or through the concrete section and pulled under controlled tension. This allows the wire to cut sections that are beyond the practical cutting depth of conventional blade saws.

 

Wire sawing is particularly useful when:

Very Thick Concrete

The concrete is too thick for a conventional blade saw, such as pile caps, raft foundations and mass concrete.

Limited Access

There is limited access or not enough room to install a conventional saw track.

 

Irregular or Curved Shapes

The section has an irregular, curved or difficult shape that cannot be easily handled with conventional blade cutting.

Heavy Reinforcement

Heavy reinforcement makes conventional blade cutting impractical for the concrete section.

 

Low-Vibration Cutting

Low-vibration cutting is required near sensitive structures, equipment or occupied areas.

Large Concrete Sections

A large concrete section needs to be removed in manageable pieces for safer handling and removal.

 

Restricted Drainage or Shutdown

The work involves a structure that cannot be easily drained or taken out of service.

Controlled Demolition

Controlled demolition is required instead of breaking the concrete with heavy impact equipment.

 

If the wire can be safely routed around the section, it can be an effective solution for very thick and heavily reinforced concrete.

 

Need the right cutting method for your project ?

For a standard door opening or a smaller straight cut in a normal wall, wall sawing may be faster and more economical. We assess the site and recommend the cutting method that fits the actual job.

WHAT WE CUT — CONCRETE WIRE SAWING IN ABU DHABI

What We Cut — Concrete Wire Sawing in Abu Dhabi

Specialist diamond wire sawing for thick, heavily reinforced concrete structures where conventional cutting may not be practical.

 

Foundations, Pile Caps and Raft Foundations

Diamond wire sawing can be used to cut thick reinforced concrete foundations, pile caps and raft sections for structural modifications, extensions, tie-ins and controlled removal

Bridges, Culverts and Infrastructure

Large concrete structures such as bridge decks, piers, abutments and culverts can require specialist cutting equipment. We plan the cutting sequence around the structure, access requirements and lifting arrangements

 

Columns, Beams and Transfer Slabs

Wire sawing can cut heavily reinforced structural members where conventional blade cutting may not be practical. It can also be used where sections need to be removed in controlled pieces

 

Lift Pits, Tanks and Machine Bases

Industrial facilities, warehouses and other sites can require concrete cutting around existing equipment and structures. Wire sawing provides a controlled way to separate large concrete sections while limiting vibration

Controlled and Selective Demolition

Where breaking concrete with heavy impact equipment is unsuitable, diamond wire sawing can be used for controlled dismantling. Sections can be cut into pieces that can then be lifted and removed according to the project’s lifting plan

 

Tunnels, Shafts and Large Openings

Diamond wire sawing is suited to cutting large or irregular concrete sections in tunnels, shafts and structural openings where access is restricted or conventional saws cannot reach. Cuts can be planned in sections so the concrete can be safely lifted, removed and cleared from the work area

 

OUR CONCRETE WIRE SAWING PROCESS

Our Concrete Wire Sawing Process

Specialist diamond wire sawing for thick, heavily reinforced concrete structures where conventional cutting may not be practical.

 

01

Step 1 — Site Assessment

We inspect the concrete section, access, dimensions and surrounding area to plan the safest cutting and removal method.

 

02

Step 2 — Concrete Scanning

Where required, we scan structural concrete to identify rebar, post-tensioning cables, conduits and other embedded services before cutting.

 

03

Step 3 — Setup

We drill access holes where needed, then install the diamond wire, drive unit and guide pulleys securely around the cutting area.

 

04

Step 4 — Wire Cutting

The diamond wire runs under controlled tension while water helps cool the cutting process and control dust. Our operators monitor the equipment throughout the cut.

 

05

Step 5 — Section Removal

Large sections are supported, secured and lifted according to the planned removal sequence.

 

06

Step 6 — Cleanup

We remove concrete debris and manage cutting slurry, leaving the area ready for the next stage of work.

 

UNDERWATER CUTTING

Underwater Wire Sawing in Abu Dhabi

Diamond wire sawing can also be used for concrete structures located underwater or in areas that cannot be easily drained.

 

Potential applications include:

submarine-fill

Marine Piles

quay

Quay Walls

topology-complex

Jetty Structures

buoy-marine

Bridge and Marine Infrastructure

water

Water Intake Structures

water-pump-rounded

Pump Chambers

water-tank

Tanks

concrete-bag

Concrete Structures Below the Water Table

Why Wire Sawing Works Underwater

One of the advantages of wire sawing in these environments is that the surrounding water helps cool the cutting process and suppress airborne concrete dust.

Careful Planning Before Underwater Cutting

Underwater cutting requires careful planning. Where diving is required, the work should be coordinated with the appropriate qualified diving team and carried out according to an approved dive plan. Lifting arrangements, access, structural stability and the sequence of cuts should be agreed before work begins.

CHOOSING THE RIGHT METHOD

Wire Sawing vs. Other Concrete Cutting Methods

Not every concrete cutting job requires a diamond wire saw. The right method depends on the thickness, shape, location and purpose of the cut.

 

Cutting Method

Best Suited For

tools-pliers-wire-stripper

Diamond Wire Sawing

Very thick concrete, heavily reinforced structures, large sections and difficult access

wall

Wall Sawing

Straight cuts through concrete walls and slabs where a saw track can be installed

floor-plan-duotone-sharp

Floor Sawing

Horizontal concrete floors, slabs, roads and pavements

drill

Core Drilling

Circular holes for pipes, cables, ducts and other services

team-settings-sharp

Our team can assess the structure and recommend the most practical cutting method rather than using wire sawing for every application.

Concrete Scanning, Safety and Site Preparation

Wire sawing on a structural element requires more than simply setting up a cutting machine.

Before work starts, the cutting method, sequence, access, lifting arrangements and site controls should be reviewed. Depending on the project, this may include:

 
team-settings-sharp

Our team can coordinate with the client’s site management, HSE personnel and structural engineer to establish the appropriate cutting and removal procedure.

construction-worker

Site inspection

skills-assessment

Risk assessment

worker-outline

Method statement

scanning

Concrete scanning

rebar

Rebar detection

overhead-wires

Post-tensioning cable

magnification

Embedded service identification

pin-construction

Temporary works or propping

project-outlined

Lifting and removal planning

permit-sharp

Work permits

dns-zone

PPE and exclusion zones

fire-bold

HSE requirements

shutdown

Shutdown coordination

WHY CONTRACTORS USE US

Why Contractors Use Welldonestar for Wire Sawing

Welldonestar provides specialist concrete cutting services for construction, demolition, industrial and infrastructure projects across Abu Dhabi.

We focus on using the appropriate cutting method for each project rather than automatically choosing the largest or most expensive equipment.

 

01

team-building

Diamond Cutting Equipment & Trained Operators

Wire sawing contractors in Abu Dhabi with diamond cutting equipment and trained operators.

 

02

engineer

Cutting Experience Since 2013

Cutting experience in the UAE since 2013.

 

03

cause-domestic-abuse

Abu Dhabi Service Coverage

Service coverage across Abu Dhabi and surrounding areas.

 

04

concrete-bag

Complete Concrete Cutting Services

Wire sawing, wall sawing, floor sawing, slab cutting, core cutting and concrete scanning under one service provider.

 

05

cutting-table

Cutting & Controlled Section Removal

Support with cutting, site preparation and controlled section removal.

 

06

night-sky

Night, Weekend & Shutdown Work

Night, weekend and planned shutdown work where required.

 

07

concrete-finisher

Solutions for Thick & Reinforced Concrete

Cutting solutions for thick, reinforced and difficult-to-access concrete.

 

What Our Clients Say About Us

Our reputation is built on quality work and customer satisfaction. See what homeowners, contractors, and businesses say about our core cutting, concrete cutting, and demolition services across Dubai.

WHERE WE WORK

Where We Work

We provide concrete wire sawing and specialist concrete cutting services across Abu Dhabi and surrounding areas.

 

Mussafah

ICAD

Khalifa City

Mohammed Bin Zayed
City

Shakhbout City

Al Reem Island

Al Maryah Island

Yas Island

Saadiyat Island

Al Shamkha

Abu Dhabi
& Surrounding
Areas

Al Raha

We provide concrete wire sawing and specialist concrete cutting services across Abu Dhabi, including Mussafah, ICAD, Khalifa City, Mohammed Bin Zayed City, Shakhbout City, Al Reem Island, Al Maryah Island, Yas Island, Saadiyat Island, Al Shamkha and other areas across the emirate.

 

Service availability for Ruwais, the Western Region and Al Ain can be confirmed based on the project location and scope.

WIRE SAWING COST

What Does Wire Sawing Cost in Abu Dhabi?

The cost of concrete wire sawing depends on the amount and thickness of concrete being cut, along with the conditions of the site.

 

Factors That Affect the Price

concrete-pour

Concrete thickness

ruler

Total length and area of the cut

cage

Amount of reinforcement

walking

Access to the cutting area

height-measure

Cutting height

shapes

Shape and geometry of
the structure

electric-plug

Water and power availability

plier-16

Equipment requirements

cleaning-man

Lifting and section removal

site-plan

Site preparation

clock-12

Working hours

night-light

Night or shutdown requirements

location-sharp

Project location

How Wire Sawing
Is Estimated

Wire sawing is commonly estimated based on the amount of concrete being cut, but complex projects may also require additional equipment, access arrangements, lifting and temporary works.

 

Get an Initial Quotation

We can review drawings, photographs and approximate dimensions to provide an initial quotation. For structural or complex projects, a site assessment may be recommended before the final price is confirmed.

 

Frequently Asked Questions About Wire Sawing

What is wire sawing?

Wire sawing is a concrete cutting method that uses a continuous loop of diamond-impregnated wire. The wire is routed around or through the concrete and pulled under controlled tension to cut through reinforced concrete and other hard materials.

It is particularly useful for thick concrete, large structural sections and areas where conventional saws have limited access or cutting depth.

How thick can a wire saw cut?

Wire sawing does not have the same practical blade-depth limitation as a conventional circular saw. The practical cutting range depends on whether the wire can be safely routed around the section, along with access, equipment setup, structural conditions and the required removal method.

 

Can diamond wire sawing cut reinforced concrete?

Yes. Diamond wire systems can cut through reinforced concrete, including concrete containing substantial steel reinforcement. The reinforcement and structural conditions should be assessed before cutting, particularly when working on load-bearing or post-tensioned structures.

Does wire sawing cause vibration?

Diamond wire sawing does not rely on impact or hammering, so it generally produces much less vibration than conventional concrete breaking methods. This can make it suitable for projects where vibration needs to be controlled around sensitive structures, equipment or occupied areas.

 

Is wire Sawing Messy?

Wet cutting is commonly used during diamond wire sawing to cool the cutting process and control concrete dust. This produces slurry that needs to be contained and managed properly during the work.

 

Can you cut concrete underwater?

Yes, diamond wire sawing can be used for suitable underwater concrete cutting applications. These may include marine piles, quay walls, jetty structures, water intake structures and other concrete sections that cannot easily be drained.

Underwater work requires additional planning for diving, access, lifting, structural stability and site safety

Do you scan concrete before cutting?

For structural cutting, scanning can be used to identify reinforcement, post-tensioning cables and hidden services before cutting begins.

The appropriate scanning and inspection requirements depend on the structure, project specifications and site conditions.

Can you remove the concrete before cutting?

Yes. Large concrete sections can be separated into manageable pieces and removed according to the project’s lifting and removal plan.

Where required, lifting equipment such as cranes can be coordinated as part of the overall work package.

Can you work at night or during shutdown?

Yes. Night, weekend and planned shutdown work can be arranged for projects where daytime cutting would interfere with building occupants, production or other site activities.

The available working hours depend on site permissions and project requirements

Book a Wire Sawing Crew in Abu Dhabi

Have a thick or heavily reinforced concrete structure that needs to be cut?
Tell us what the structure is, its approximate thickness and dimensions, where it is located and when you need the work completed

 
WelldoneStar