Floor Sawing Services in Abu Dhabi
Welldonestar cuts concrete floors, slabs and roads across Abu Dhabi with diamond floor saws, clean, straight cuts with no damage to the surrounding slab. Musaffah-based since 2013. Same-day mobilisation.
- All UAE Emirates
- Best Price
- Quick Response
- On-Time Delivery
Method Statement
Fully Insured
For Your Protection
10+ Years in UAE
Own Machines
Trained Operators
Our Clients
Trusted By Leading Companies







FLOOR SAW CUTTING
When You Need Floor Saw Cutting in Abu Dhabi
A floor saw is the right tool whenever concrete has to be cut horizontally and the surrounding slab has to survive intact. The blade cuts rather than impacts, so there is no shock loading into the structure, no spalled edges, and no over-break past the line you marked.
Contractors, project managers and facility teams call us for:
Trench Cutting for
MEP
Electrical, plumbing, drainage and cable routes cut to exact width and depth so services drop straight in.
Expansion & Control
Joints
Cut into new and existing industrial floors to help control cracking and maintain clean, defined joints.
All Type Slab
Openings
Lift shafts, stair voids, service risers and duct penetrations through structural floors.
Road, Pavement & Asphalt Cutting
Clean edges for reinstatement on carriageways, car parks, access roads and industrial yards.
Removing Damaged Floor Sections
Cut a defined panel out for replacement without disturbing the surrounding floor or slab.
Demolition
Preparation
Section a concrete slab into manageable, liftable pieces before controlled removal.
If the concrete is vertical, wall sawing is the correct method instead. Floor saws are built for horizontal concrete cutting — floors, slabs, roads and pavements
Not sure what type of concrete cutting you need?
Send a photo, dimensions and details of the area on WhatsApp and we will recommend the right cutting method.
OUR FLOOR CUTTING SERVICES IN ABU DHABI
Our Floor Cutting Services in Abu Dhabi
Precision concrete cutting for floors, slabs, trenches, roads and structural openings across Abu Dhabi.
Concrete
Floor Cutting
Precision concrete floor cutting through reinforced slabs using diamond blades matched to the aggregate and rebar density. Cuts run to a chalked or laser line with a tolerance most consultants sign off on first inspection, leaving clean concrete cuts that need no chasing or making good
Trench
Cutting
We cut parallel lines to the required trench width, then break and clear the concrete between them. Depth is controlled pass by pass, which protects services running below the slab and keeps the trench floor level for bedding
Expansion Joint
Cutting
Joints cut at the correct depth-to-thickness ratio and at the spacing your specification calls for. Timing matters on new pours — we mobilise inside the cutting window rather than the next working day as soon as possible
Road and Asphalt
Cutting
Heavy-duty floor saws for carriageways, hardstanding and industrial yards. Straight concrete cutting to a defined edge means the reinstatement joint is tight and the patch does not fail early under traffic.
Slab Openings and Structural Cuts
Structural concrete cutting for lift shafts, stair openings and riser penetrations through suspended and ground-bearing floors, executed to an engineer’s approved drawing.
Concrete Floor Removal & Breaking
Cutting and breaking of concrete floors, slabs and hardstanding areas after saw cuts are made. We use hydraulic breakers and suitable equipment to remove the concrete in controlled sections, keeping sur
CAPABILITIES
What We Can Cut
Our floor cutting equipment and diamond tooling are selected to handle demanding concrete, asphalt and structural cutting requirements across Abu Dhabi.
Depth
Deep concrete cutting in controlled passes, with stepped passes or cutting from both faces where greater depth is needed.
Surfaces
Reinforced concrete, mass concrete, asphalt, screed, pavers, ground-bearing and suspended slabs.
Reinforcement
Diamond segments specified for reinforced concrete cutting — blades pass through rebar without snatching or tearing the slab.
Method
Wet cutting as standard, with slurry contained and vacuumed on occupied and finished floors.
Site Power
Diesel, electric and hydraulic saws — we bring our own power where site supply is unavailable.
Access
Machines sized for basements, plant rooms and internal floors as well as open external slabs.
PRE-CUT SCANNING
We Scan Before We Cut
Safe concrete floor sawing in Abu Dhabi starts before the blade touches the slab. The risk on any floor is not the concrete — it is what is inside it.
Scan the Cut Line
Post-tension cables, primary rebar, conduit and live drainage can all sit inside concrete slabs. Hitting one can turn a routine cut into a structural incident or services outage. We scan the cut line before the blade touches the slab.
Mark & Adjust Before Cutting
We mark what we find and adjust the cutting line or depth with you before starting. If scanning shows the cut cannot be made safely at the position drawn, we say so before mobilising rather than after.
SAFETY & COMPLIANCE
Permits, Approvals and Structural Sign-Off
Cutting a structural floor in Abu Dhabi almost always needs paperwork before it needs a machine.
Structural Clearance
On suspended and post-tensioned slabs we do not cut without a structural engineer’s approved drawing. If you do not have one yet, we will tell you what the engineer needs to see.
Method Statement & Risk Assessment
Supplied for every job, in the format main contractors and facility managers submit for permit-to-work.
Road & Public-Area Works
Cutting on carriageways, footpaths and public hardstanding requires municipal or authority approval. We supply the technical documentation your application depends on.
Occupied Buildings
Wet cutting with slurry recovery, plus night and weekend shifts, so live offices, hotels, malls and warehouses keep operating.
OUR PROCESS
How We Work
01
Site survey
Access, slab type, thickness, power and water
02
Scan and mark
Rebar, post-tension and services identified on the cut line
03
Documentation
Method statement, risk assessment, structural clearance confirmed
04
Set up
Machine positioned, line set, water and slurry control in place
05
Controlled cutting
Depth built up in passes to the marked line
06
Clear and hand over
Debris removed, area cleaned, cut inspected with you
AREAS WE SERVE
Where We Work in Abu Dhabi
Zone
Areas Covered
Typical Response
Industrial
Musaffah, ICAD, KIZAD, Khalifa Industrial Zon
Same day
City & Islands
Abu Dhabi Island, city centre, Al Reem, Al Maryah, Saadiyat, Yas
Same day
Suburbs
Khalifa City, MBZ City, Shakhbout City, Al Raha
Same day
Wider Emirates
Al Ain, Ruwais, Western Region
Scheduled
If your site is not listed, call — we cover the emirate.
CONCRETE CUTTING COST
What It Costs
Floor concrete cutting in Abu Dhabi is priced per linear metre, and the rate moves with depth and reinforcement more than anything else. A shallow cut in a plain screed and a deep cut through a heavily reinforced structural slab are different jobs at different rates.
What Your Quotation Includes
- Total linear metres and cutting depth
- Slab type and reinforcement density
- Access, working hours and whether the site is live
- Scanning, slurry control, debris removal and disposal
- Mobilisation, with a minimum charge on small jobs
Get an Indicative Figure
Send dimensions and a photo and you will have an indicative figure the same day. Firm pricing follows the site visit.
Within 24 Hours
Quotation after site visit
WHY CONTRACTORS USE US
Why Contractors Use Welldonestar
We are a floor sawing company in Abu Dhabi, not a broker passing your job to a subcontractor. The machines are ours, the operators are ours, and the person who surveys your site is the person accountable for the cut.
Twelve Years in the UAE Market
Twelve years in the UAE market, 1,000+ projects delivered.
Our Own Diamond Cutting Fleet
Floor sawing contractors in Abu Dhabi with our own diamond cutting fleet.
Same-Day Survey & 24/7 Response
Same-day survey and 24/7 emergency response.
Method Statement & Risk Assessment
Method statement and risk assessment on every job.
Clean, Controlled Cuts
Clean, controlled cuts with no over-break or structural damage.
Full Clear-Down
Full clear-down — we do not leave debris behind.
REVIEWS
What Our Clients Say About Us
Our reputation is built on quality work and customer satisfaction. See what homeowners, contractors, and businesses say about our core cutting, concrete cutting, and demolition services across Dubai.
Posted on Google![]()
Imran MughalTrustindex verifies that the original source of the review is Google.
Good rental and transportation company in Abu dhabiPosted on Google![]()
Aashiq MohamedTrustindex verifies that the original source of the review is Google.
Top class equipment supplier..! Good condition equipments with proper maintenance. Excellent service.Posted on Google![]()
Zubair ZubairTrustindex verifies that the original source of the review is Google.
Telehandler boom loader for rental was 2020 and 2021 model same like new condition. Skid steer loader bobcat rental was 2025 model superb experience. Backhoe loader jcb 3cx rental was also very good condition.Posted on Google![]()
Aliwaris AliTrustindex verifies that the original source of the review is Google.
Very good construct equipment rental company in Abu Dhabi UAWPosted on Google![]()
Ghulam HaiderTrustindex verifies that the original source of the review is Google.
Best Company for Construction and Transport works in UAE. Keep up the good Work.Posted on Google![]()
Najaf AliTrustindex verifies that the original source of the review is Google.
Best construction equipment rental company in Abu Dhabi UAE. All equipment was in very good condition and new models. Very good operatorPosted on Google![]()
Ajmal ChTrustindex verifies that the original source of the review is Google.
Cunstruction & Transportation very good. All the best.Posted on Google![]()
Sohail AmirTrustindex verifies that the original source of the review is Google.
Having Very good team of Diamond wire saw concrete cutting work, Wall saw concrete cutting works, concrete coring works, interlock and kerbstone works ,basko works and good condition of bobcat,jcb and boom loaderPosted on Google![]()
Welldoer ContractingTrustindex verifies that the original source of the review is Google.
Very good Contracting and construction equipment rental company in abu Dhabi UAE. skid steer loader bobcat, JCb backhoe loader, Boom loader and other all construction equipments are very good condition.
Frequently Asked Questions
Floor sawing is a form of concrete sawing used on horizontal surfaces. A walk-behind saw with a diamond blade cuts through concrete floors, slabs, pavements and asphalt along a guided line, producing a straight, square cut without the vibration and over-break of breaking or hammering.
Depth is built up in controlled passes rather than forced in one, which is what keeps the cut straight and the slab undamaged. Where a slab is thicker than a single pass allows, we step the cut or work from both faces if the underside is accessible. Tell us the slab thickness and we will confirm the method on the call.
Yes. Our blades are specified for reinforced concrete cutting and pass through rebar cleanly without snatching, tearing the slab or leaving damaged edges.
Floor sawing cuts horizontal surfaces — floors, slabs, roads and pavements. Wall sawing uses a track-mounted saw on vertical surfaces for door openings, lift shafts and wall penetrations. Most structural projects need both.
No. Diamond cutting is close to vibration-free and the cut stops precisely at the marked line, so the surrounding slab is unaffected. This is the main reason floor sawing is used instead of breaking on structural and finished floors.
Yes. The cut line is scanned for rebar, post-tension cables and buried services, and marked up before any blade touches the floor.
Yes. Night and weekend shifts are standard across Abu Dhabi, and wet cutting with slurry recovery keeps dust down in occupied offices, hotels, malls and warehouses.
Pricing is per linear metre and depends on depth, reinforcement and access. Send dimensions for an indicative figure the same day, or book a site visit for a firm quotation.
Yes. Breaking out and clearing cut sections is included as standard. Off-site disposal can be added on request.
The full emirate, including Mussafah, ICAD, Khalifa City, Al Reem Island, Yas Island, Saadiyat Island and the city centre. [Al Ain and Ruwais on scheduled mobilisation.]
Get Your Floor Cut This Week
Tell us the location, the slab thickness and how many metres you need cut. You will get feasibility, an indicative rate and a mobilisation window the same day.



