Slab Cutting Services in Abu Dhabi

Need a clean opening cut in a concrete floor? We do slab cutting in Abu Dhabi for contractors, site engineers and facility teams. We cut floor openings, stair openings, lift shaft openings and pipe holes through reinforced concrete slabs. No hammers. No cracked floors. No mess left behind.
We have been cutting concrete in the UAE since 2013. We own our machines and our operators are our own staff.

Cutting since 2013

in the UAE

Own Machines

And Crews

Scanning Before

Structural Cut

Night & Shutdown

Work Available

Trusted By Leading Companies

DIAMOND WIRE SAWING

Diamond Wire Sawing for Thick and Reinforced Concrete

A circular blade has a finite cutting depth. As concrete gets thicker, the blade may not be able to cut completely through the section from one side. Diamond wire sawing works differently. A continuous loop of diamond-impregnated wire is routed around or through the concrete section and pulled under controlled tension. This allows the wire to cut sections that are beyond the practical cutting depth of conventional blade saws.

 

What Slab Cutting Means on a Real Sit

Slab cutting is cutting through a concrete floor slab to make an opening or to remove part of it. The slab may sit on the ground. It may be a suspended slab with beams under it. Both need a different plan.

A concrete slab is not just concrete. It holds steel bars inside it, and that steel is what makes it strong. So we use diamond concrete cutting on every job. The blade cuts the concrete and the steel at the same time, and the cut edge comes out straight and clean, so your new frame, pipe or stair fits without patch work.

What We Cut

concrete-pour

Floor openings for stairs, lifts and hatches

ruler

Concrete slab openings for pipes, ducts and cables

cage

Reinforced concrete slab cutting in structural floors

walking

RCC slab cutting in podium and basement decks

cage

Slab sections removed for renovation or demolition

walking

Trimming and squaring off old, broken openings

team-settings-sharp

If the wire can be safely routed around the section, it can be an effective solution for very thick and heavily reinforced concrete.

team-settings-sharp

Need the right cutting method for your project

For a standard door opening or a smaller straight cut in a normal wall, wall sawing may be faster and more economical. We assess the site and recommend the cutting method that fits the actual job.

WHY SITE TEAMS CALL US

Why Site Teams Call Us for Slab Cutting in Abu Dhabi

A circular blade has a finite cutting depth. As concrete gets thicker, the blade may not be able to cut completely through the section from one side. Diamond wire sawing works differently. A continuous loop of diamond-impregnated wire is routed around or through the concrete section and pulled under controlled tension. This allows the wire to cut sections that are beyond the practical cutting depth of conventional blade saws.

 

Cut Through Steel Bars

Diamond blades made for reinforced concrete cutting.

No Damage to the Rest of the Floor

Controlled cutting, straight cuts, no impact tools.

Work Inside a Live Building

Water-cooled cutting and dust control, with low noise.

Openings That Fit First Time

Marked, measured and squared before the saw starts.

Slab Removed Safely

Cut into lift-out sections, no drop and no debris shower.

Crew That Knows UAE Sites

Water-cooled cutting and dust control, with low noise.
team-settings-sharp
We are a slab cutting company in Abu Dhabi, not a broker. The machine that turns up is ours. The operator running it works for us.

SLAB CUTTING CONTRACTORS

Slab Cutting Contractors in Abu Dhabi

Most slab cutting contractors in Abu Dhabi hire the machine and the man from someone else. We do not. Since 2013 we have run our own diamond cutting equipment with our own crews. That means one company is responsible for the cut, the safety file and the finish. If something needs fixing, you call us, not a chain of three subcontractors.

Own Equipment

Own Trained Crews

WHO YOU ARE HIRING

Who You Are Hiring

Before a structural cutting crew starts work, you need to know who is actually responsible for the equipment, operators and safety documentation.

 

CHECK

OUR POSITION

tools-pliers-wire-stripper

Trade Licence

Welldonestar Construction Machinery & Building Demolition Rental L.L.C, Abu Dhabi

wall

Years Operating

Since 2013

floor-plan-duotone-sharp

Equipment

Owned, not hired. Diamond saws, wire saws, core drills.

drill

Operators

Directly employed and trained. No day labour.

drill

Safety Documents

Risk assessment and method statement supplied before mobilisation.

drill

Scanning

Carried out before every structural cut.

One company. One accountable crew.

Equipment, operators and cutting responsibility stay under one roof from mobilisation to completion.

REINFORCED CONCRETE SLAB CUTTING

Reinforced Concrete Slab Cutting and RCC Slabs

Most slabs in Abu Dhabi are RCC slabs. That means reinforced cement concrete — concrete with steel bars inside

RCC slab cutting is harder than cutting plain concrete. The blade meets steel every few centimetres. That slows the cut and heats the blade. This is why we run water through the blade while it cuts. The water cools the diamond segments and keeps the concrete dust down at the same time

Cutting a structural slab also changes how the floor carries weight. Before we cut a suspended slab, we ask for the structural engineer’s sign-off on the opening size and place. Where the opening needs temporary support, we install the propping before cutting and take it out once the engineer confirms it can come out

We will not cut a structural slab opening without that sign-off. It protects your project and ours.

One company. One accountable crew.

Equipment, operators and cutting responsibility stay under one roof from mobilisation to completion.

CUTTING METHOD

Slab Thickness and Which Method We Use

Not every slab needs the same machine. This is the usual picture on Abu Dhabi sites:

SLAB TYPE

Usual Thickness

How We Cut It

Ground Floor Slab

150–200mm

Floor saw, single pass

Suspended Floor Slab

200–300mm

Floor saw, engineer sign-off first

Podium or Basement Deck

300–500mm

Cut from both faces
where access allows

Raft or Heavy Industrial Slab

500mm and above

Wire sawing

Not sure how thick your slab is? Send a photo of an exposed edge or a stair void and we can usually tell.

CUTTING METHOD

Slab Thickness and Which Method We Use

We scan before we cut. Every time.

Inside a slab there can be live cables, water pipes, post-tension strands and heavy rebar. Cutting into any of these is expensive and dangerous. Our scanning shows what sits inside the slab so we can plan the cut around it.

If we find something we cannot cut through, we tell you before we start, not after. Sometimes the answer is to shift the opening by a few hundred millimetres. Sometimes the answer is a different method, like wire sawing or core cutting.

 
 

SLAB CUTTING APPLICATIONS

What People Use Slab Cutting For

Most of our slab cutting work in Abu Dhabi falls into these jobs:

 

01

MEP and Services

Slab cutting for drainage runs and gully points. Ground floor slabs opened up, pipe laid, slab made good again

 

02

Drainage

Slab cutting for drainage runs and gully points. Ground floor slabs opened up, pipe laid, slab made good again

 

03

Openings in the Structure

Floor opening cutting for new stairs. Slab cutting for lift installation and lift pit work. Hatch and riser openings. Door opening cutting and AC duct opening cutting in the walls nearby — see our wall sawing page

 

04

Renovation and Demolition

Slab cutting for renovation where a floor level changes. Slab cutting for basement work. Slab modification where an old opening needs to grow. Floor removal and concrete removal in sections. For strip-out we cut the deck into pieces small enough to lift out, which is quieter and safer than breaking

 

CLEAN & CONTROLLED CUTTING

Dust, Water and Working in Live Buildings

Many of our jobs are in buildings still being used — offices, malls, hotels, villas with people living in them.

Concrete dust is the main complaint on those sites, so we use water-cooled cutting and most of the dust turns into slurry instead of going into the air.

We sheet off the work area, bring vacuums and slurry control, and clean the floor before we leave

No-water areas?

Tell us at the enquiry stage so we can plan the right cutting and dust-control method.

Wire sawing

Dust controlled at source

Slurry Control

Work area kept clean

Wire sawing

Dust controlled at source

OUR SLAB CUTTING PROCESS

How a Slab Cutting Job Runs

From the first photo to final clean-up, we plan the job around your site conditions and the work that needs to follow.

 

CLEAN & CONTROLLED CUTTING

What We Need From Your Site

Have these ready and the crew gets straight to work.

Water

A tap or supply near the cut. If there is not one, tell us and we bring our own.

Power

Most jobs run on a 220V socket. Bigger slabs need a 415V three phase supply. Tell us what is available and we will match the machine to it.

Slurry

Somewhere for the water to drain, or tell us and we contain it and take it away.

Access

A route for the machine to reach the slab. Lifts, stairs and tight corners change the plan.

Clearance

The area emptied of furniture, stock or plant before we arrive.

Approvals

The engineer’s sign-off on any opening in a suspended slab.

If something is missing, say so early. We would rather plan around it than have the crew stood down at the gate.

FROM ENQUIRY TO CLEAN-UP

Six Steps From Start to Finish

01

You Send the Details

Location, slab thickness if you know it, opening size, and a photo. A photo saves everyone a site visit. Typical time to site: 24hr.

02

Site Visit and Risk Assessment

We look at access, power, water, and what sits above and below the slab. We write the risk assessment and method statement here.

03

Permits and Approvals

We help with the paperwork your main contractor or building owner needs.

04

Scanning and Marking

We scan the slab, mark the cut lines, and confirm them with you before the blade touches concrete.

05

Site Preparation and Cutting

We sheet off, set up water and dust control, and cut. Safety measures and PPE are standard, not extra.

06

Removal and Clean-Up

Cut sections are lifted out in a controlled way. We clear the debris and leave the area clean and ready for the next trade.

AREAS WE COVER

Areas We Cover in Abu Dhabi

We are based in Musaffah M09 and cover the whole emirate, with slab cutting crews available across Abu Dhabi.

 

Based in Musaffah M09

Covering Abu Dhabi and surrounding areas

Cutting Method

Best Suited For

01

Musaffah

Warehouse and industrial slab cutting, machine bases

02

Mohammed Bin Zayed City

Villa and low-rise floor openings

03

Khalifa City

Fit-out and renovation slab cutting

04

Al Reem Island

Tower slab openings, MEP penetrations

05

Yas Island

Hotel and leisure fit-out cutting

06

Al Raha

Commercial and residential slab cutting

07

Baniyas

Residential slab cutting and drainage work

08

Abu Dhabi City

Offices, retail and existing structures

If your site is outside these areas, call anyway.

We cover jobs across the UAE.

THE FINISHED RESULT

What You Get When We Finish

We leave a clean, square opening with straight edges. No cracked corners, no spalled concrete around the cut, and no rebar left sticking out where someone can catch on it.

We do not do the making good or the new floor finish. That stays with your main contractor. We hand over a clean opening ready for them to work to.

Debris goes with us unless you tell us otherwise. The area is swept before we leave

Clean, Square Opening

Straight edges and accurately cut corners ready for the next stage of work.

Controlled Cut

No unnecessary impact damage, cracked corners or spalled concrete around the opening.

Clean Work Area

Cut debris is removed and the work area is swept before we leave.

Ready for the Next Trade

We hand over a clean opening ready for your main contractor to continue the work.

SLAB CUTTING COST

What Slab Cutting Costs

We price each job on its own. There is no fixed rate per metre, because every site and every slab has different requirements.

 

01

Slab Thickness & Reinforcement

Slab thickness and how much steel is inside affect the cutting method and time required.

02

Total Cut Length

Pricing is based on the total length of cut, not just the size of the opening.

03

Access to the Slab

A basement with restricted access can require more planning than a straightforward ground-floor job.

04

Day or Night Work

Working hours can affect the crew, access and overall requirements of the job.

05

Water Access

If suitable water is not available on site, we can bring our own supply and equipment.

06

Removal & Disposal

Whether cut sections need to be removed and taken away also affects the final scope.

SLAB CUTTING COST

Send Us the Job Details

Send us the opening size, the slab thickness and a photo. We will review the requirements and provide a clear quote based on the actual work involved.

Clear pricing with no surprise line items later.

SLAB CUTTING COST

What Slab Cutting Costs

Once the price is agreed and the permits are clear, most slab cutting jobs in Abu Dhabi start within 24hr. Small residential slab cutting jobs are usually quicker than commercial ones, because the paperwork is lighter.

We also take urgent call-outs when a site is held up and a trade cannot move until the opening is cut.

URGENT CALL-OUTS AVAILABLE

+971 551745867

Call us when your site cannot wait.

REVIEWS

What Our Clients Say About Us

Our reputation is built on quality work and customer satisfaction. See what homeowners, contractors, and businesses say about our core cutting, concrete cutting, and demolition services across Dubai.

 

Frequently Asked Questions

Can you cut reinforce concrete slabs?

Yes. Almost every slab we cut is reinforced. Our diamond blades are made to cut through concrete and steel bars together.

Get Your Slab Cut Properly, First Time

Tell us the opening size, the slab thickness and where the site is. We will give you a price and a date.

 
WelldoneStar