Wall Sawing Services in Abu Dhabi
Precise, low-vibration cuts through reinforced concrete walls, with clean edges and minimal disturbance to the surrounding structure. Al Raihan Rental provides wall sawing across Abu Dhabi for door and window openings, AC and MEP penetrations, lift shafts and structural modifications, with night and weekend work available for occupied sites.
- All UAE Emirates
- Best Price
- Quick Response
- On-Time Delivery
Method Statement
Fully Insured
For Your Protection
10+ Years in UAE
Own Machines
Trained Operators
Our Clients
Trusted By Leading Companies







WALL SAWING
When You Need a Wall Saw
A track-mounted diamond saw is the right method when you need a clean, square opening through concrete that is too thick or too heavily reinforced for a handheld cutter, and when breaking is not an option because of noise, dust or structural risk.
Door and Window
Openings
Cut into existing RCC and block walls during villa, office and retail refurbishments.
AC Duct & Ventilation Openings
Sized to the drawing so the unit seats flush with no unnecessary patching.
Plumbing & Electrical Penetrations
Grouped MEP openings coordinated to a single service run where required.
Lift Shafts & Stair Openings
Cutting through structural slabs and shear walls for new access and building works.
Controlled
Demolition
Remove a defined wall section without disturbing the surrounding structure.
Structural Wall
Cutting
Cutting on load-bearing elements to an engineer’s approved drawing.
Because the blade cuts rather than impacts, wall sawing is close to vibration-free. That is why it is specified in hospitals, hotels, data rooms and older buildings where breaking would risk cracking finishes or disturbing adjacent structure.
PRE-CUT SCANNING
We Scan Before We Cut
The most expensive mistake on a concrete opening is hitting something inside the wall. A severed conduit or a cut water line turns a half-day job into a week of remedial work and a claim.
Every opening is scanned before the blade goes in. We locate rebar, post-tension cables, conduits and embedded services, then mark the cut line around them or bring the position back to your consultant if the opening needs to move.
CUTTING CAPABILITY
Cutting Capability
Most enquiries come down to two questions: can you get through the depth, and can you handle the rebar.
Specification
Capability
Wall Types
Reinforced concrete, RCC, block and precast
Reinforcement
Heavy rebar cut clean, with no spalling or tearing
Post-tensioned elements
Assessed case by case with your structural engineer
Cutting depth
Confirmed against your wall thickness at survey. Deeper walls are cut from both faces where access allows
Machine type
Track-mounted diamond wall saw
Cut orientation
Vertical, horizontal and inclined
Flush cutting
Against adjacent walls and floors
Opening shape
Rectangular openings cut square to drawing dimensions
Site power
Site supply where available, or our own power on site
Dust and slurry
Wet cutting with closed vacuum slurry recovery
Edge finish
Square and chamfer-free, ready for framing
CONCRETE REMOVAL
Getting the Concrete Out
Cutting the opening is half the job. A 400 mm reinforced section a metre square weighs close to a tonne, and how it leaves the building is what decides your programme.
We size every cut to what can be safely handled on your site. Where sections can be manoeuvred by hand, we cut them into manageable panels. Where they cannot, we bring lifting equipment and rig the section out under a controlled lift.
Removal of cut sections from the work area is included as standard. Disposal off site can be added to the scope on request.
WORKING AT HEIGHT
Openings at Height
Not every opening is at ground level. Facade penetrations, upper-floor AC openings and warehouse wall cuts all need a stable working platform, and hired-in access is usually where the programme slips.
We supply our own access equipment alongside the cutting crew, so the platform arrives with the saw on the same mobilisation. One supplier, one schedule, no waiting on a third party to deliver a lift before your job can start.
AREAS WE SERVE
Where We Work in Abu Dhabi
Our crews cover the emirate, from the industrial zones through to the islands and the city centre.
Mussafah & ICAD
Khalifa City
Mohammed Bin Zayed
City
Shakhbout City
Al Reem Island
Al Maryah Island
Yas Island
Saadiyat Island
Corniche
Al Mushrif
Central Abu Dhabi
Al Raha
Industrial sites come with their own hurdles. Gate passes, site inductions and HSE documentation all have to be in order before a crew gets past security, and a team that turns up without them costs you half a day. We know what each site expects and we arrive with the paperwork sorted, so the job starts when it is scheduled to start.
Site surveys are carried out across Abu Dhabi, usually within a day of your enquiry.
OUR PROCESS
How the Job Runs
SAFETY & COMPLIANCE
Safety, Permits and Structural Clearance
Written Safety Documentation
Every job runs under a written method statement with a task-specific risk assessment. Our operators are trained and certified, and we carry public liability cover with documentation issued before mobilisation.
Structural Clearance
Where the wall is load-bearing or forms part of a shear element, we will not cut until an approved structural drawing or engineer’s confirmation is in place. We can work alongside your consultant to sequence propping and temporary support.
Occupied Building Protection
For occupied buildings, we run wet cutting with vacuum slurry recovery and schedule night or weekend shifts to keep disruption off your operating hours.
REVIEWS
What Our Clients Say About Us
Our reputation is built on quality work and customer satisfaction. See what homeowners, contractors, and businesses say about our core cutting, concrete cutting, and demolition services across Dubai.
Posted on Google![]()
Imran MughalTrustindex verifies that the original source of the review is Google.
Good rental and transportation company in Abu dhabiPosted on Google![]()
Aashiq MohamedTrustindex verifies that the original source of the review is Google.
Top class equipment supplier..! Good condition equipments with proper maintenance. Excellent service.Posted on Google![]()
Zubair ZubairTrustindex verifies that the original source of the review is Google.
Telehandler boom loader for rental was 2020 and 2021 model same like new condition. Skid steer loader bobcat rental was 2025 model superb experience. Backhoe loader jcb 3cx rental was also very good condition.Posted on Google![]()
Aliwaris AliTrustindex verifies that the original source of the review is Google.
Very good construct equipment rental company in Abu Dhabi UAWPosted on Google![]()
Ghulam HaiderTrustindex verifies that the original source of the review is Google.
Best Company for Construction and Transport works in UAE. Keep up the good Work.Posted on Google![]()
Najaf AliTrustindex verifies that the original source of the review is Google.
Best construction equipment rental company in Abu Dhabi UAE. All equipment was in very good condition and new models. Very good operatorPosted on Google![]()
Ajmal ChTrustindex verifies that the original source of the review is Google.
Cunstruction & Transportation very good. All the best.Posted on Google![]()
Sohail AmirTrustindex verifies that the original source of the review is Google.
Having Very good team of Diamond wire saw concrete cutting work, Wall saw concrete cutting works, concrete coring works, interlock and kerbstone works ,basko works and good condition of bobcat,jcb and boom loaderPosted on Google![]()
Welldoer ContractingTrustindex verifies that the original source of the review is Google.
Very good Contracting and construction equipment rental company in abu Dhabi UAE. skid steer loader bobcat, JCb backhoe loader, Boom loader and other all construction equipments are very good condition.
WALL SAWING COST
What It Costs
Wall sawing is quoted on linear metres cut, adjusted for depth and reinforcement. A 200 mm block wall and a 400 mm reinforced shear wall are very different jobs at the same length.
What Your Quotation Includes
Your quotation accounts for cut length and wall depth, reinforcement density, access and working height, water and power availability on site, shift timing, and whether disposal is included.
- Cut length & wall depth
- Reinforcement density
- Access & working height
- Water & power availability
- Shift timing
- Disposal requirements
Clear, Site-Specific Quotations
Quotations are issued within 24 hours of the site visit, with a minimum call-out charge on smaller jobs.
Within 24 Hours
Quotation after site visit
SCOPE OF WORK
What Is and Isn’t Included
Included
- Site survey
- Method statement and risk assessment
- Scanning [if applicable]
- Cutting
- Slurry containment
- Removal of sections from the work area
- Full clean-down
Not Included
- Structural engineer’s design or sign-off
- Propping design
- Lintel installation
- Patching or making good around the opening
- Framing
- Off-site disposal unless agreed in the quotation
We will tell you up front which trades you still need. Nobody likes finding out on handover day.
WHY CONTRACTORS USE US
Why Contractors Use Us
We own the machines.
No waiting on a third-party supplier, no markup layered onto your rate.
We turn up when we say.
A delayed opening holds up every trade behind it, so mobilisation windows are confirmed in writing.
We leave the site clean.
Slurry recovery, sheeting and clean-down are scope, not extras.
We handle the paperwork.
Method statements, risk assessments and insurance certificates come up front, so your HSE manager is not chasing us.
One supplier, full scope.
Wall sawing, core cutting and concrete cutting and demolition from the same crew, with access equipment included.
Frequently Asked Questions
Wall sawing is a cutting method that uses a diamond blade mounted on a track fixed to the wall. The track guides the blade in a perfectly straight line, producing a square opening with clean edges. It is used where an opening needs to be accurate and where breaking would create unacceptable dust, noise or structural risk.
A track is anchored to the wall along the cut line and the saw head travels along it, driven hydraulically or electrically. The blade enters in stages, deepening with each pass until it breaks through. Water cools the blade and captures dust, and the slurry is vacuumed away as the cut progresses.
Our saws cut up to [XXX] mm in a single pass. Deeper walls can be cut by working from both faces where access allows. Send us the wall dimensions and we will confirm before mobilising.
Yes. Diamond blades cut straight through rebar without tearing the surrounding concrete or leaving spalled edges. Reinforcement density affects cutting time, not whether the cut is possible.
Yes, and it is the most common job we do. Openings are cut square to your drawing dimensions so the frame seats without packing or patching.
Core drilling produces a round hole, typically for a pipe, cable or duct passing through a wall or slab. Wall sawing produces a straight-sided opening of any size and shape. If you need a circular penetration, core drilling is faster and cheaper. If you need a door, window or a rectangular opening, you need a wall saw.
Yes, provided the modification is approved. We cut structural and load-bearing elements regularly, but only against an engineer’s drawing or written confirmation, with propping sequenced where required.
Telehandler rental can be arranged depending on your project location and equipment availability. Contact us with your location and required machine specifications.
A standard door opening in a reinforced wall is usually cut and removed within a single shift. Lift shafts, multi-cut jobs and openings at height are scheduled after the site survey.
The full emirate, including Mussafah, ICAD, Khalifa City, Al Reem Island, Yas Island, Saadiyat Island and the city centre. [Al Ain and Ruwais on scheduled mobilisation.]
Need a Wall Cut in Abu Dhabi?
Tell us the wall dimensions and the site location. We will confirm feasibility, give you a mobilisation window, and send the method statement your contractor needs.







